Building Demolition and Crushing

Handle demolition, renovation, and initial waste processing of various buildings, supporting reconstruction and transformation, including multi-story building demolition and road surface treatment.

Take to our expert

PROVIDING INDUSTRY-WIDE SOLUTIONS BASED ON SPECIFIC NEEDS

Scenarios: Building demolition, renovation, waste processing

Materials: Residential/commercial building structures, concrete, steel

Attachments: Hydraulic Breaker, Hydraulic Shear, Crusher Bucket, Long Boom and Arm, etc.

Building Demolition and Dismantling (Residential/Commercial/Industrial)

Hydraulic Breaker

1. Break concrete walls/floor slabs
2. Demolish industrial equipment foundations
3. Remove old asphalt for road renovation
Hydraulic breaker for excavator, skid steer loader, etc | 1-70 ton

Quick consultation

Eagle Shear

1. Cut construction steel bars/frames
2. Dismantle scrap vehicle components
3. Handle industrial pipes/pressure vessels

Eagle shear for excavator | 2-85 ton

Quick consultation

Demolition Grapple

1. Grab and crush construction debris
2. Sort metal/non-metal in waste
3. Compress waste to reduce transportation volume
Demolition grapple for excavator | 2.5-37 ton

Quick consultation

Scrap Magnet

1. Extract steel bars/nails from waste
2. Recover scrap steel from industrial piles
3. Integrate with crushers for magnetic separation lines
Scrap magnet for excavator | 2-35 ton

Quick consultation

Long Boom and Arm

1. Demolish high-rise buildings (≥15m)
2. Clean deep foundation pit waste
3. Grab silt from rivers at long range
Long boom and arm for excavator | 12-45 ton

Quick consultation

Hydraulic Pulverizer

1. Crush concrete into recycled aggregate
2. Dismantle pre-stressed concrete elements
3. Process wood-metal mixed renovation waste
Hydraulic pulverizer for excavator | 10-35 ton

Quick consultation

Drum Cutter

1. Mill road markings/bridge pavements
2. Trim tunnel rock faces
3. Roughen concrete surfaces for adhesion
Drum cutter for excavator | 8-38 ton

Quick consultation

Hydraulic Compactor

1. Compact foundations to prevent settlement
2. Layered compaction for pipeline backfill
3. Quickly compact temporary roads for traffic
Hydraulic compactor for excavator | 1-32 ton

Quick consultation

Renovation and Reconstruction

Hydraulic Breaker

1. Demolish partial structures of old buildings (e.g., expanding door and window openings)
2. Chip off defective parts of concrete structures (honeycombs and pitting)
3. Perform preliminary crushing before road milling

Hydraulic breaker for excavator, skid steer loader, etc | 1-70 ton

Quick consultation

Auger

1. Drill holes for installing anchor bolts and steel structure embedded parts
2. Form holes for deep mixing piles in foundation reinforcement
3. Carry out foundation drilling for photovoltaic power plants and wind turbines
Auger for excavator, skid steer loader, etc | 1-50 ton

Quick consultation

Plie Driver

1. Drive steel/concrete piles for foundation
Remove old wooden/steel piles
Install small building piles (fences/sheds)
Plie driver for excavator | 7-52 ton

Quick consultation


Initial Waste Processing

Crusher Bucket

1. Crush construction waste into 20-100mm aggregate
2. Process mine waste for road base
3. Break concrete for temporary roads
Crusher bucket for excavator | 20-40 ton

Quick consultation

Screening Crusher Bucket

1. Crush and screen waste for grading
2. Separate recyclables from soil-rock mixtures
3. Screen ore and waste soil in mines

Screening crusher bucket for excavator | 9-30 ton

Quick consultation